Carbon fiber frames for FPV drones
Purpose:
Domestically produced carbon frames for FPV are cheaper than imported ones.
Package contents:
Antenna holders;
10 plastic ties;
Beams – 6.1 mm (also wider than in Chinese analogs);
The top plate is 2.3 mm;
The middle plate is 2.3 mm;
The bottom plate is 2.3 mm;
The side plate is 2.0 mm;
Racks 22 and 30 mm;
Clamping nuts;
Screws.
Advantages:
7 inches:
Free antenna holders and 10 plastic ties – UAH 728. Additional offer +109 UAH with Ukrainian-made propellers with a higher thrust coefficient HQProp 7040.
The BLITZ Whoop 5.8G 2.5W VTX video transmitter is placed.
8 inches:
Free antenna holders and 10 plastic ties – UAH 927. Additional offer +288 UAH with Ukrainian-made propellers with a higher thrust coefficient Gemfan 8040.
The BLITZ Whoop 5.8G 2.5W VTX video transmitter is included.
The diagonal between the 7″ propellers is 295 mm (analogous to Mark 4);
The diagonal between the 8″ propellers is 330 mm;
The TrueX frame base layout improves handling and makes it impossible to twist the frame, unlike popular, cheap Chinese frames;
The camera’s viewing angle between the propellers has been increased by 53%. (Comparison with Mark 4).
Warranty and the possibility of replacing damaged carbon panels, as well as a discount for regular customers.
It is possible to customize the drone’s frame to the customer’s wishes.
Localization of domestic Ukrainian production and prevention of currency leakage abroad.
Possibility of mass production of up to 5000 pieces per month.
